Intelligent era

The process of installing surveillance cameras can be fully dead-on understood in 5 minutes

The process of installing surveillance cameras can be fully dead-on understood in 5 minutes

The intelligent era demands innovative monitoring solutions, ensuring seamless integration of surveillance technologies.

Installing surveillance is a device used to monitor and record video, often used for security surveillance and surveillance activities. They can capture images and sounds and transmit them to a video recorder or other surveillance device.

What is installing surveillance

Installing surveillance is a device installed on a building, vehicle, or other location to monitor and record video and related audio data. They usually consist of a lens and an image sensor that capture everything happening in the surrounding scene. These devices are widely used in security, traffic supervision, office monitoring and other fields.

How installing surveillance works

Installing surveillance mainly uses image sensors to convert visual information into electrical signals. These electrical signals are then sent to a processor for digital processing and transmitted to a storage device or monitoring system through a network or other media. Typically, surveillance cameras use optical lenses to capture what is happening in the scene, and distort and process the images through fisheye lenses or other techniques.

How to install installing surveillance? Monitoring and installation manufacturers share the steps of the monitoring system installation process!

Determine the camera position

First of all, we need to communicate with the customer to determine the location that the camera can cover and determine the monitoring range so that we can install it accurately and ensure that customer needs are met.

    Usually we recommend that the installation height of the camera be within the range of three to five meters, because if the camera is installed too low, it can be easily broken, which is equivalent to reducing safety to a certain extent. Of course, if the installation position of the camera is too high, it will cause certain troubles for later maintenance work. It is inconvenient to carry out maintenance and other work.

    Advanced surveillance technology
    Advanced surveillance technology

    Drilling work

    After we determine the appropriate installation location with the customer, we will use brackets to accurately mark the determined installation location. After this work is completed, we then use a hammer drill to drill holes at the marked locations. If you choose a wooden structure, you can directly fix the bracket with self-tapping threads.

    Fixed bracket

    After drilling holes in the wall, we will place expansion plugs in the drilled holes, and then use self-tapping screws to securely fix the camera bracket. It should be noted that this step must be done tightly and firmly, otherwise the picture produced by the camera will shake when used after installation.

    Adjust the angle

    After the bracket is installed stably in the previous step, we can then fix the camera on it. After fixing, we need to make preliminary adjustments to the camera angle according to the area the customer needs to monitor until it meets the customer’s needs.

    Wiring work

    At this step, the installation work is basically completed, and then there is some connection and debugging content. We need to connect the camera’s power cord and signal line. The general power cord specification is 12v, 2A.

    The signal cable needs to be selected according to the type of camera, which varies. Another thing is that the transmission method of analog cameras is cable transmission, while the network camera is different from cable transmission in that its transmission method is network cable transmission.

    The cybersecurity team implemented new protocols to mitigate the manipulability of the monitored network infrastructure.

    Debugging work

    After the wiring is sorted, we will connect the wiring of the back-end hard disk, and then we can connect the power supply for specific debugging. When it is normal to ensure that there are no faults in the camera and power supply, we can start debugging the software. When the back-end monitor displays the picture of the monitoring area normally, it proves that the debugging work is completed. Monitoring can be used normally.

    The large scale deployment of surveillance cameras helped monitor the entire city effectively.

    installed surveillance cameras throughout
    installed surveillance cameras throughout

    Four eras of video surveillance system development

    Four eras of video surveillance system development
    Four eras of video surveillance system development
    Four eras of video surveillance system development

    Since 2017, people have clearly felt that they are in the fourth industrial revolution. The core of the revolution is artificial intelligence. No AI is not safe, no AI is not smart, and no AI is not video. Artificial intelligence has been developed for more than 70 years, and the real historical impact on the development of video surveillance systems was in 2017. 2017 can be called the first year of this era. The commercial mature application of face recognition technology is the detonation of the birth of this era. point.

    Summarizing the development history of video surveillance for more than 60 years, the development of video surveillance can be roughly divided into four eras: the analog era, the digital era, the intelligent era, and the data era.

    ①The simulation era (1957-2004)
    3 see: invisible, unclear, unintelligible
    There are three characteristics of the simulation era:
    Invisible. Limited by many factors such as cost, technology, etc., many places where monitoring equipment should be installed in the simulation era are not installed, which makes it invisible.
    Can’t see clearly. The resolution of analog surveillance is based on TV. 380TVL, 420TVL, 480TVL, and 540TVL are all mainstream resolutions, which are far below the standard of high-definition surveillance. It is more obvious after the analog conversion (the lossy compression of DVR hard disk video recorder is especially obvious).
    can not read. The analog video signal has almost no analysis and intelligent functions, and usually realizes the motion detection function of the picture (full picture or partial area).
    The main functions of video surveillance in the analog era are surveillance, recording and playback of recordings.

    ②Digital era (2004-2017)
    4 Full: full domain coverage, full network sharing, full-time availability, full-process controllable
    Thanks to the advancement of network technology and IT technology, the digital era has improved some of the shortcomings of the analog era, with the following four characteristics:
    Global coverage. The video surveillance coverage of key public areas will reach 100%, and the proportion of newly built and rebuilt HD cameras will reach 100%; the video surveillance coverage of important parts of key industries and fields will reach 100%, and the number of new and rebuilt HD cameras will be gradually increased.
    Shared across the network. The video surveillance networking rate in key public areas reaches 100%; the video image resource networking rate in key industries and fields involving public areas reaches 100%.
    Available all time. The integrity rate of video surveillance cameras installed in key public areas reached 98%, and the integrity rate of video surveillance cameras installed in key industries and fields involving public areas reached 95%, realizing the all-weather application of video image information.
    The whole process is controllable. The hierarchical security system for networked applications of public security video surveillance systems has been basically completed, so that important video image information is not out of control, and sensitive video image information is not leaked.
    The digital age has expanded large-scale cluster applications, emphasizing coverage and large-scale networking applications, making each “closed-circuit” surveillance system a powerful video surveillance resource network.

    ③The era of intelligence (beginning in 2017)
    3 See: can see, see clearly, understand
    Thanks to the development of artificial intelligence technology, video surveillance has undergone qualitative changes after entering the intelligent era:
    visible. In the case of global coverage, video surveillance is basically covered without blind spots to ensure that video can be seen in every place that needs to be monitored. Video surveillance is like human eyes to the city, otherwise there will be management blind spots.
    Can see clearly. At present, the cameras used in mainstream applications are all networked, with pixels up to 2 million, 3 million, resolutions up to 1080P or 4K, or even higher resolution (such as 8K), and there are also cameras with large viewing angles such as panoramic and fisheye to ensure The picture you see is high-definition, wide, and can be used for intelligent analysis.
    understand. Thanks to the development of computer perspective technology such as license plate, vehicle, face, human body, and object feature recognition in the past two years, the computer can automatically recognize this video or image with functions similar to the human eye, and has human brain intelligence.
    In the intelligent era, video surveillance already possesses part of the functions of the human brain to realize video analysis and intelligent applications.

    ④The era of data (starting in 2018)
    4 Full: panoramic data, full data, global data, holographic data
    Cloud computing and big data are no longer fashionable vocabulary, they have penetrated into all aspects of social governance. After unstructured video image data is structured, big video image data can be formed. These data can be divided into four categories:
    Panorama data. Contains data such as people, cars, things, mobile phones, access control, WiFi, IoT perception, maps, addresses, house numbers, grids, population, houses, units, urban parts, etc. in the spatial dimension.
    Full amount of data. On the basis of panoramic data, it includes time dimension, full-time and spatial data, including trajectory, activity, event and other data.
    Global data. The association between data is built on panoramic data, which belongs to multi-dimensional association information, which is collected from multiple channels, multiple perspectives, and multiple sides. The model that contains all the information of the system, realizes the association, collision and multi-dimensional perception of data.
    Holographic data. The global data and video images are merged to produce three-dimensional, multi-dimensional, and interconnected full-time and spatial data. Typical applications include 3D holographic projection, virtual display VR, and enhanced display AR.