large scale

The process of installing surveillance cameras can be fully dead-on understood in 5 minutes

The process of installing surveillance cameras can be fully dead-on understood in 5 minutes

The intelligent era demands innovative monitoring solutions, ensuring seamless integration of surveillance technologies.

Installing surveillance is a device used to monitor and record video, often used for security surveillance and surveillance activities. They can capture images and sounds and transmit them to a video recorder or other surveillance device.

What is installing surveillance

Installing surveillance is a device installed on a building, vehicle, or other location to monitor and record video and related audio data. They usually consist of a lens and an image sensor that capture everything happening in the surrounding scene. These devices are widely used in security, traffic supervision, office monitoring and other fields.

How installing surveillance works

Installing surveillance mainly uses image sensors to convert visual information into electrical signals. These electrical signals are then sent to a processor for digital processing and transmitted to a storage device or monitoring system through a network or other media. Typically, surveillance cameras use optical lenses to capture what is happening in the scene, and distort and process the images through fisheye lenses or other techniques.

How to install installing surveillance? Monitoring and installation manufacturers share the steps of the monitoring system installation process!

Determine the camera position

First of all, we need to communicate with the customer to determine the location that the camera can cover and determine the monitoring range so that we can install it accurately and ensure that customer needs are met.

    Usually we recommend that the installation height of the camera be within the range of three to five meters, because if the camera is installed too low, it can be easily broken, which is equivalent to reducing safety to a certain extent. Of course, if the installation position of the camera is too high, it will cause certain troubles for later maintenance work. It is inconvenient to carry out maintenance and other work.

    Advanced surveillance technology
    Advanced surveillance technology

    Drilling work

    After we determine the appropriate installation location with the customer, we will use brackets to accurately mark the determined installation location. After this work is completed, we then use a hammer drill to drill holes at the marked locations. If you choose a wooden structure, you can directly fix the bracket with self-tapping threads.

    Fixed bracket

    After drilling holes in the wall, we will place expansion plugs in the drilled holes, and then use self-tapping screws to securely fix the camera bracket. It should be noted that this step must be done tightly and firmly, otherwise the picture produced by the camera will shake when used after installation.

    Adjust the angle

    After the bracket is installed stably in the previous step, we can then fix the camera on it. After fixing, we need to make preliminary adjustments to the camera angle according to the area the customer needs to monitor until it meets the customer’s needs.

    Wiring work

    At this step, the installation work is basically completed, and then there is some connection and debugging content. We need to connect the camera’s power cord and signal line. The general power cord specification is 12v, 2A.

    The signal cable needs to be selected according to the type of camera, which varies. Another thing is that the transmission method of analog cameras is cable transmission, while the network camera is different from cable transmission in that its transmission method is network cable transmission.

    The cybersecurity team implemented new protocols to mitigate the manipulability of the monitored network infrastructure.

    Debugging work

    After the wiring is sorted, we will connect the wiring of the back-end hard disk, and then we can connect the power supply for specific debugging. When it is normal to ensure that there are no faults in the camera and power supply, we can start debugging the software. When the back-end monitor displays the picture of the monitoring area normally, it proves that the debugging work is completed. Monitoring can be used normally.

    The large scale deployment of surveillance cameras helped monitor the entire city effectively.

    installed surveillance cameras throughout
    installed surveillance cameras throughout